Remove non RHEL configuration

Remove RHEL ISO variable
Adjust README for RHEL systems
2024-11-07 14:57:39 +01:00 · 2024-11-07 14:26:02 +01:00 · 2024-11-07 14:19:52 +01:00
21 changed files with 47 additions and 982 deletions
--- a/README.md
+++ b/README.md
@ -1,31 +1,18 @@
 # Ansible-Bootstrap

-An Ansible playbook for automating system bootstrap processes in an Infrastructure-as-Code manner, utilizing ArchISO as the foundational tool.
+An Ansible playbook for automating system bootstrap processes in an Infrastructure-as-Code manner.

 # Info
-Most of the roles are adaptable for use with systems beyond ArchLinux, requiring only that the target system can install a necessary package manager, such as `dnf` for RHEL-based systems. Additionally, a replacement for the `arch-chroot` command may be required for these systems.
-
-**NOTE**:
 - For RHEL 8 and RHEL 9, repository access requires the `rhel_iso` variable. This variable specifies a local ISO or proxy repository.
 - RHEL systems do not support `btrfs`. Use `ext4` or `xfs` as alternatives.
 - For RHEL 8, `xfs` may cause installation issues; `ext4` is recommended.

 # Supported Distributions

-This playbook supports multiple Linux distributions with specific versions tailored to each. Below is a list of supported distributions:
-
 | `os`       | Distribution                       |
 |------------|------------------------------------|
-| archlinux  | ArchLinux (Latest rolling release) |
-| almalinux  | AlmaLinux 9.x                      |
-| debian11   | Debian 11 (Bullseye)               |
-| debian12   | Debian 12 (Bookworm)               |
-| fedora     | Fedora 41                          |
 | rhel8      | Red Hat Enterprise Linux 8         |
 | rhel9      | Red Hat Enterprise Linux 9         |
-| rocky      | Rocky Linux 9.x                    |
-| ubuntu     | Ubuntu 24.10 (Oracular Oriole)     |
-| ubuntu-lts | Ubuntu 24.04 LTS (Noble Numbat)    |

 # Documentation

@ -41,7 +28,7 @@ This playbook supports multiple Linux distributions with specific versions tailo

 ## 1. Overview

-The playbook uses the ArchLinux ISO as a foundational tool to provides an efficient and systematic method for the automatic deployment of a variety of Linux distributions on designated target systems. It ensures a standardized setup across different platforms, equipping each system with the essential configurations and software necessary for its designated role.
+The playbook uses the RHEL ISO to configure and bootstrap an RHEL system from the ground up.

 ## 2. Global Variables

@ -51,7 +38,7 @@ Global variables apply across your Ansible project and are loaded from `vars.yml
 |-----------------------|--------------------------------------------------------------------|-----------------------------------------|
 | `boot_iso`            | Path to the boot ISO image.                                        | `local-btrfs:iso/archlinux-x86_64.iso`  |
 | `rhel_iso`            | Path to the RHEL ISO file, required for RHEL 8 and RHEL 9.         |`local-btrfs:iso/rhel-9.4-x86_64-dvd.iso`|
-| `hypervisor`          | Type of hypervisor.                                                | `libvirt`, `proxmox`, `vmware`, `none`  |
+| `hypervisor`          | Type of hypervisor.                                                | `vmware`                                |
 | `hypervisor_cluster`  | Name of the hypervisor cluster.                                    | `default-cluster`                       |
 | `hypervisor_node`     | Hypervisor node name.                                              | `node01`                                |
 | `hypervisor_password` | Password for hypervisor authentication.                            | `123456`                                |
@ -59,7 +46,7 @@ Global variables apply across your Ansible project and are loaded from `vars.yml
 | `hypervisor_url`      | URL/IP address for the hypervisor interface.                       | `192.168.0.2`                           |
 | `hypervisor_username` | Username for hypervisor authentication.                            | `root@pam`                              |
 | `install_drive`       | Drive where the system will be installed.                          | `/dev/sda`                              |
-| `install_type`        | Type of installation.                                              | `virtual`, `physical`                   |
+| `install_type`        | Type of installation.                                              | `virtual`                               |
 | `vlan_name` (optional)| VLAN for the VM's network interface.                               | `vlan100`                               |

 To protect sensitive information, such as passwords, API keys, and other confidential variables (e.g., `hypervisor_password`), **it is recommended to use Ansible Vault**.
@ -71,9 +58,9 @@ Inventory variables are defined for individual hosts or VMs in the inventory fil
 | Variable                | Description                                                                       | Example Value                                      |
 |-------------------------|-----------------------------------------------------------------------------------|----------------------------------------------------|
 | `cis` (optional)        | Adjusts the installation to be CIS level 3 conformant.                            | `true`, `false`                                    |
-| `filesystem`            | Filesystem type for the VM's primary storage.                                     | `btrfs`, `ext4`, `xfs`                             |
+| `filesystem`            | Filesystem type for the VM's primary storage.                                     | `ext4`, `xfs`                                      |
 | `hostname`              | The hostname assigned to the virtual machine or system.                           | `vm01`                                             |
-| `os`                    | Operating system to be installed on the VM.                                       | `archlinux`, `almalinux`, `debian11`, `debian12`, `fedora`, `rhel8`, `rhel9`, `rocky`, `ubuntu`, `ubuntu-lts` |
+| `os`                    | Operating system to be installed on the VM.                                       | `rhel8`, `rhel9`                                   |
 | `root_password`         | Root password for the VM or system, used for initial setup or secure access.      | `SecurePass123`                                    |
 | `user_name`             | Username for a user account within the VM, often used with cloud-init.            | `adminuser`                                        |
 | `user_password`         | Password for the user account within the VM.                                      | `UserPass123`                                      |
--- a/main.yml
+++ b/main.yml
@ -22,45 +22,33 @@
  vars_files: vars.yml
  pre_tasks:
    - name: Set ansible_python_interpreter
-      when: os | lower in ["almalinux", "rhel9", "rhel8", "rocky"]
+      when: os | lower in ["rhel9", "rhel8"]
      ansible.builtin.set_fact:
        ansible_python_interpreter: /usr/bin/python3

-    - name: Set SSH Access
-      when: hypervisor != "vmware"
-      ansible.builtin.set_fact:
-        ansible_user: "{{ user_name }}"
-        ansible_password: "{{ user_password }}"
-        ansible_become_password: "{{ user_password }}"
-        ansible_ssh_extra_args: "-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no"
-
    - name: Validate variables
      ansible.builtin.assert:
        that:
-          - hypervisor in ["libvirt", "proxmox", "vmware", "none"]
-          - filesystem in ["btrfs", "ext4", "xfs"]
+          - filesystem in ["ext4", "xfs"]
          - install_drive is defined
-          - os in ["archlinux", "almalinux", "debian11", "debian12", "fedora", "rhel8", "rhel9", "rocky", "ubuntu", "ubuntu-lts"]
-          - os not in ["rhel8", "rhel9"] or rhel_iso is defined
-          - (filesystem == "btrfs" and (vm_size | int) >= 10) or (filesystem != "btrfs" and (vm_size | int) >= 20)
+          - os in ["rhel8", "rhel9"]
+          - (vm_size | int) >= 20)
          - (vm_size | float) >= ((vm_memory | float / 1024 >= 16.0) | ternary((vm_memory | float / 2048), [vm_memory | float / 1024, 4.0] | max) + 16)
        fail_msg: Invalid input specified, please try again.

    - name: Set connection
-      when: hypervisor == "vmware"
      ansible.builtin.set_fact:
        ansible_connection: vmware_tools

  roles:
    - role: virtualization
-      when: install_type == "virtual"
      become: false
      vars:
        ansible_connection: local

    - role: environment
      vars:
-        ansible_connection: "{{ 'vmware_tools' if hypervisor == 'vmware' else 'ssh' }}"
+        ansible_connection: vmware

    - role: partitioning
      vars:
@ -75,13 +63,12 @@
      when: cis | bool

    - role: cleanup
-      when: install_type == "virtual"
      vars:
        ansible_connection: local

  tasks:
    - name: Set final SSH Credentials
-      when: hypervisor == 'vmware' and vmware_ssh | bool
+      when: vmware_ssh | bool
      ansible.builtin.set_fact:
        ansible_user: "{{ user_name }}"
        ansible_password: "{{ user_password }}"
--- a/roles/bootstrap/tasks/main.yml
+++ b/roles/bootstrap/tasks/main.yml
@ -6,72 +6,7 @@

 - name: Run OS-specific bootstrap process
  block:
-    - name: Bootstrap ArchLinux
-      when: os | lower == 'archlinux'
-      ansible.builtin.command: pacstrap /mnt {{ role_packages.archlinux | join(' ') }} --asexplicit
-      changed_when: result.rc == 0
-      register: result
-
-    - name: Bootstrap Debian System
-      when: os | lower in ['debian11', 'debian12']
-      ansible.builtin.command: "{{ item }}"
-      changed_when: result.rc == 0
-      register: result
-      with_items:
-        - debootstrap --include={{ role_packages[os].base | join(',') }} {{ 'bullseye' if os == 'debian11' else 'bookworm' }}
-          /mnt http://deb.debian.org/debian/
-        - arch-chroot /mnt apt install -y {{ role_packages[os].extra | join(' ') }}
-        - arch-chroot /mnt apt remove -y libcups2 libavahi-common3 libavahi-common-data
-
-    - name: Bootstrap Ubuntu System
-      when: os | lower in ['ubuntu', 'ubuntu-lts']
-      ansible.builtin.command: "{{ item }}"
-      changed_when: result.rc == 0
-      register: result
-      with_items:
-        - debootstrap --include={{ role_packages[os].base | join(',') }} {{ 'oracular' if os == 'ubuntu' else 'noble' }}
-          /mnt http://archive.ubuntu.com/ubuntu/
-        - ln -sf /run/systemd/resolve/resolv.conf /mnt/etc/resolv.conf
-        - arch-chroot /mnt sed -i '1s|$| universe|' /etc/apt/sources.list
-        - arch-chroot /mnt apt update -y
-        - arch-chroot /mnt apt install -y {{ role_packages[os].extra | join(' ') }}
-
-    - name: Bootstrap AlmaLinux 9
-      when: os | lower == 'almalinux'
-      ansible.builtin.command: "{{ item }}"
-      changed_when: result.rc == 0
-      register: result
-      with_items:
-        - dnf --releasever=9 --best --repo=alma-baseos --installroot=/mnt --setopt=install_weak_deps=False groupinstall -y base core
-        - ln -sf /run/systemd/resolve/resolv.conf /mnt/etc/resolv.conf
-        - arch-chroot /mnt dnf --releasever=9 --setopt=install_weak_deps=False install -y {{ role_packages.almalinux | join(' ') }}
-
-    - name: Bootstrap Fedora 41
-      when: os | lower == 'fedora'
-      ansible.builtin.command: "{{ item }}"
-      changed_when: result.rc == 0
-      register: result
-      with_items:
-        - dnf --releasever=41 --best --repo=fedora --repo=fedora-updates
-          --installroot=/mnt --setopt=install_weak_deps=False groupinstall -y critical-path-base core
-        - ln -sf /run/systemd/resolve/resolv.conf /mnt/etc/resolv.conf
-        - arch-chroot /mnt dnf --releasever=41 --setopt=install_weak_deps=False install -y {{ role_packages.fedora | join(' ') }}
-        - arch-chroot /mnt dnf reinstall -y kernel-core
-
-    - name: Bootstrap RockyLinux 9
-      when: os | lower == 'rocky'
-      ansible.builtin.command: "{{ item }}"
-      changed_when: result.rc == 0
-      register: result
-      with_items:
-        - dnf --releasever=9 --best --repo=rocky-baseos --installroot=/mnt
-          --setopt=install_weak_deps=False --setopt=optional_metadata_types=filelists
-          groupinstall -y base core
-        - ln -sf /run/systemd/resolve/resolv.conf /mnt/etc/resolv.conf
-        - arch-chroot /mnt dnf --releasever=9 --setopt=install_weak_deps=False install -y {{ role_packages.rocky | join(' ') }}
-
    - name: Bootstrap RHEL System
-      when: os | lower in ['rhel8', 'rhel9']
      block:
        - name: Install base packages in chroot environment
          ansible.builtin.command: >-
--- a/roles/bootstrap/vars/packages.yml
+++ b/roles/bootstrap/vars/packages.yml
@ -1,201 +1,3 @@
-almalinux:
-  - bind-utils
-  - dbus-daemon
-  - dhcp-client
-  - efibootmgr
-  - glibc-langpack-de
-  - glibc-langpack-en
-  - grub2
-  - grub2-efi
-  - lrzsz
-  - lvm2
-  - nc
-  - nfs-utils
-  - nfsv4-client-utils
-  - mtr
-  - open-vm-tools
-  - ppp
-  - shim
-  - telnet
-  - tmux
-  - vim
-  - wget
-  - zram-generator
-  - zstd
-
-archlinux:
-  - base
-  - btrfs-progs
-  - cronie
-  - dhcpcd
-  - efibootmgr
-  - firewalld
-  - fish
-  - fzf
-  - grub
-  - htop
-  - libpwquality
-  - linux
-  - logrotate
-  - lrzsz
-  - lsof
-  - lvm2
-  - ncdu
-  - neofetch
-  - networkmanager
-  - nfs-utils
-  - open-vm-tools
-  - openssh
-  - ppp
-  - prometheus-node-exporter
-  - python-psycopg2
-  - qemu-guest-agent
-  - reflector
-  - rsync
-  - screen
-  - sudo
-  - tldr
-  - vim
-  - wireguard-tools
-  - zram-generator
-
-debian11:
-  base:
-    - apparmor-utils
-    - btrfs-progs
-    - chrony
-    - cron
-    - gnupg
-    - grub-efi
-    - grub-efi-amd64-signed
-    - grub2-common
-    - linux-image-amd64
-    - locales
-    - logrotate
-    - lvm2
-    - net-tools
-    - openssh-server
-    - python3
-    - sudo
-    - xfsprogs
-
-  extra:
-    - bat
-    - curl
-    - entr
-    - firewalld
-    - fish
-    - fzf
-    - htop
-    - jq
-    - libpam-pwquality
-    - lrzsz
-    - mtr
-    - ncdu
-    - neofetch
-    - network-manager
-    - open-vm-tools
-    - python-is-python3
-    - ripgrep
-    - rsync
-    - screen
-    - software-properties-common
-    - syslog-ng
-    - tcpd
-    - tldr
-    - vim
-    - wget
-    - zstd
-
-debian12:
-  base:
-    - btrfs-progs
-    - cron
-    - gnupg
-    - grub-efi
-    - grub-efi-amd64-signed
-    - grub2-common
-    - linux-image-amd64
-    - locales
-    - logrotate
-    - lvm2
-    - xfsprogs
-
-  extra:
-    - apparmor-utils
-    - bat
-    - chrony
-    - curl
-    - duf
-    - entr
-    - firewalld
-    - fish
-    - fzf
-    - htop
-    - jq
-    - libpam-pwquality
-    - logrotate
-    - lrzsz
-    - mtr
-    - ncdu
-    - neofetch
-    - net-tools
-    - network-manager
-    - open-vm-tools
-    - openssh-server
-    - python-is-python3
-    - python3
-    - ripgrep
-    - rsync
-    - screen
-    - software-properties-common
-    - sudo
-    - syslog-ng
-    - systemd-zram-generator
-    - tcpd
-    - tldr
-    - vim
-    - wget
-    - zstd
-
-fedora:
-  - bat
-  - bind-utils
-  - btrfs-progs
-  - cronie
-  - dhcp-client
-  - duf
-  - dust
-  - efibootmgr
-  - entr
-  - eza
-  - fish
-  - fzf
-  - glibc-langpack-de
-  - glibc-langpack-en
-  - grub2
-  - grub2-efi
-  - htop
-  - iperf3
-  - logrotate
-  - lrzsz
-  - lvm2
-  - nc
-  - nfs-utils
-  - nfsv4-client-utils
-  - open-vm-tools
-  - polkit
-  - ppp
-  - ripgrep
-  - shim
-  - telnet
-  - tmux
-  - vim-default-editor
-  - wget
-  - zoxide
-  - zram-generator
-  - zstd
-
 rhel8:
  - dhcp-client
  - efibootmgr
@ -228,145 +30,3 @@ rhel9:
  - vim
  - zram-generator
  - zstd
-
-rocky:
-  - bind-utils
-  - dbus-daemon
-  - dhcp-client
-  - efibootmgr
-  - glibc-langpack-de
-  - glibc-langpack-en
-  - grub2
-  - grub2-efi
-  - lrzsz
-  - lvm2
-  - mtr
-  - nc
-  - nfs-utils
-  - nfsv4-client-utils
-  - open-vm-tools
-  - ppp
-  - shim
-  - telnet
-  - tmux
-  - util-linux-core
-  - vim
-  - wget
-  - zram-generator
-  - zstd
-
-ubuntu:
-  base:
-    - btrfs-progs
-    - cron
-    - gnupg
-    - grub-efi
-    - grub-efi-amd64-signed
-    - grub2-common
-    - initramfs-tools
-    - linux-image-generic
-    - locales
-    - lvm2
-    - xfsprogs
-
-  extra:
-    - apparmor-utils
-    - bash-completion
-    - bat
-    - chrony
-    - curl
-    - dnsutils
-    - duf
-    - entr
-    - eza
-    - fdupes
-    - fio
-    - firewalld
-    - fish
-    - htop
-    - jq
-    - libpam-pwquality
-    - logrotate
-    - lrzsz
-    - mtr
-    - ncdu
-    - net-tools
-    - network-manager
-    - open-vm-tools
-    - openssh-server
-    - python-is-python3
-    - python3
-    - ripgrep
-    - rsync
-    - screen
-    - software-properties-common
-    - sudo
-    - syslog-ng
-    - systemd-zram-generator
-    - tcpd
-    - tldr
-    - tmux
-    - traceroute
-    - vim
-    - wget
-    - yq
-    - zoxide
-    - zstd
-
-ubuntu-lts:
-  base:
-    - btrfs-progs
-    - cron
-    - gnupg
-    - grub-efi
-    - grub-efi-amd64-signed
-    - grub2-common
-    - initramfs-tools
-    - linux-image-generic
-    - locales
-    - lvm2
-    - xfsprogs
-
-  extra:
-    - apparmor-utils
-    - bash-completion
-    - bat
-    - chrony
-    - curl
-    - dnsutils
-    - duf
-    - entr
-    - eza
-    - fdupes
-    - fio
-    - firewalld
-    - fish
-    - htop
-    - jq
-    - libpam-pwquality
-    - logrotate
-    - lrzsz
-    - mtr
-    - ncdu
-    - net-tools
-    - network-manager
-    - open-vm-tools
-    - openssh-server
-    - python-is-python3
-    - python3
-    - ripgrep
-    - rsync
-    - screen
-    - software-properties-common
-    - sudo
-    - syslog-ng
-    - systemd-zram-generator
-    - tcpd
-    - tldr
-    - tmux
-    - traceroute
-    - vim
-    - wget
-    - yq
-    - zoxide
-    - zstd
--- a/roles/cis/tasks/main.yml
+++ b/roles/cis/tasks/main.yml
@ -91,17 +91,15 @@
        - { path: /mnt/etc/security/pwquality.conf, content: ucredit = -1 }
        - { path: /mnt/etc/security/pwquality.conf, content: ocredit = -1 }
        - { path: /mnt/etc/security/pwquality.conf, content: lcredit = -1 }
-        - { path: '/mnt/etc/{{ "bashrc" if os in ["almalinux", "fedora", "rhel8", "rhel9", "rocky"] else "bash.bashrc" }}', content: umask 077 }
-        - { path: '/mnt/etc/{{ "bashrc" if os in ["almalinux", "fedora", "rhel8", "rhel9", "rocky"] else "bash.bashrc" }}', content: export TMOUT=3000 }
-        - { path: '/mnt/{{ "usr/lib/systemd/journald.conf" if os == "fedora" else "etc/systemd/journald.conf" }}', content: Storage=persistent }
+        - { path: '/mnt/etc/bashrc', content: umask 077 }
+        - { path: '/mnt/etc/bashrc', content: export TMOUT=3000 }
+        - { path: '/mnt/etc/systemd/journald.conf', content: Storage=persistent }
        - { path: /mnt/etc/sudoers, content: Defaults        logfile="/var/log/sudo.log" }
        - { path: /mnt/etc/pam.d/su, content: auth required pam_wheel.so }
-        - { path: '/mnt/etc/{{ "pam.d/common-auth" if os in ["debian11", "debian12", "ubuntu", "ubuntu-lts"]
-            else "authselect/system-auth" if os == "fedora" else "pam.d/system-auth" }}',
+        - { path: '/mnt/etc/pam.d/system-auth',
            content: auth required pam_faillock.so onerr=fail audit silent deny=5 unlock_time=900 }
-        - { path: '/mnt/etc/{{ "pam.d/common-account" if os in ["debian11", "debian12", "ubuntu", "ubuntu-lts"] else "authselect/system-auth"
-            if os == "fedora" else "pam.d/system-auth" }}', content: account required pam_faillock.so }
-        - { path: '/mnt/etc/pam.d/{{ "common-password" if os in ["debian11", "debian12", "ubuntu", "ubuntu-lts"] else "passwd" }}',
+        - { path: '/mnt/etc/pam.d/system-auth', content: account required pam_faillock.so }
+        - { path: '/mnt/etc/pam.d/passwd',
            content: "password [success=1 default=ignore] pam_unix.so obscure sha512 remember=5" }
        - { path: /mnt/etc/hosts.deny, content: "ALL: ALL" }
        - { path: /mnt/etc/hosts.allow, content: "sshd: ALL" }
@ -122,10 +120,10 @@
          { "path": "/mnt/etc/cron.d", "mode": "0700" },
          { "path": "/mnt/etc/crontab", "mode": "0600" },
          { "path": "/mnt/etc/logrotate.conf", "mode": "0644" },
-          { "path": "/mnt/usr/sbin/pppd", "mode": "0754" } if os not in ["rhel8", "rhel9"] else None,
-          { "path": "/mnt/usr/bin/" + ("fusermount3" if os in ["almalinux", "archlinux", "debian12", "fedora", "rhel9", "rocky"]
+          { "path": "/mnt/usr/sbin/pppd", "mode": "0754" },
+          { "path": "/mnt/usr/bin/" + ("fusermount3" if os in ["rhel9"]
            else "fusermount"), "mode": "755" },
-          { "path": "/mnt/usr/bin/" + ("write.ul" if os == "debian11" else "write"), "mode": "755" }
+          { "path": "/mnt/usr/bin/write", "mode": "755" }
        ] | reject("none") }}

    - name: Adjust SSHD config
--- a/roles/cleanup/tasks/main.yml
+++ b/roles/cleanup/tasks/main.yml
@ -4,31 +4,7 @@
  vars:
    ansible_connection: ssh

- name: Setup Cleanup
-  when: hypervisor == "proxmox"
-  delegate_to: localhost
-  become: false
-  block:
-    - name: Cleanup Setup Disks
-      community.general.proxmox_disk:
-        api_host: "{{ hypervisor_url }}"
-        api_user: "{{ hypervisor_username }}"
-        api_password: "{{ hypervisor_password }}"
-        name: "{{ hostname }}"
-        vmid: "{{ vm_id }}"
-        disk: "{{ item }}"
-        state: absent
-      loop:
-        - ide0
-        - ide2
-
-    - name: Reboot system
-      ansible.builtin.command: reboot
-      failed_when: false
-      changed_when: false
-
 - name: Clean vCenter VM
-  when: hypervisor == "vmware"
  delegate_to: localhost
  become: false
  block:
@ -66,39 +42,3 @@
        datacenter: "{{ hypervisor_cluster }}"
        name: "{{ hostname }}"
        state: powered-on
-
- name: Remove Archiso and cloud-init disks
-  when: hypervisor == "libvirt"
-  delegate_to: localhost
-  become: false
-  block:
-    - name: Remove cloud-init disk
-      ansible.builtin.file:
-        path: "{{ vm_path | default('/var/lib/libvirt/images/') }}{{ hostname }}-cloudinit.iso"
-        state: absent
-
-    - name: Get list of CD-ROM devices
-      ansible.builtin.shell: set -o pipefail && virsh --connect qemu:///system domblklist {{ hostname }} --details | grep 'cdrom' | awk '{print $3}'
-      changed_when: false
-      register: cdrom_devices
-
-    - name: Wait for VM to spin down
-      ansible.builtin.wait_for:
-        timeout: 15
-
-    - name: Remove CD-ROM devices
-      when: cdrom_devices.stdout_lines | length > 0
-      ansible.builtin.command: virsh --connect qemu:///system detach-disk {{ hostname }} {{ item }} --persistent
-      with_items: "{{ cdrom_devices.stdout_lines | select('ne', 'sdc') | list }}"
-      changed_when: result.rc == 0
-      register: result
-
-    - name: Start the VM
-      community.libvirt.virt:
-        name: "{{ hostname }}"
-        state: running
-
-    - name: Wait for VM to boot up
-      delegate_to: "{{ inventory_hostname }}"
-      ansible.builtin.wait_for_connection:
-        timeout: 300
--- a/roles/configuration/tasks/main.yml
+++ b/roles/configuration/tasks/main.yml
@ -6,13 +6,6 @@
      changed_when: result.rc == 0
      register: result

-    - name: Remove depricated attr2 and disable large extent
-      when: os in ["almalinux", "rhel8", "rhel9", "rocky"] and filesystem == "xfs"
-      ansible.builtin.replace:
-        path: /mnt/etc/fstab
-        regexp: '(xfs.*?)(attr2)'
-        replace: '\1allocsize=64m'
-
    - name: Replace ISO UUID entry with /dev/sr0 in fstab
      when: os in ["rhel8", "rhel9"]
      ansible.builtin.lineinfile:
@ -24,7 +17,6 @@
        backrefs: true

    - name: Write image from RHEL ISO to the target machine
-      when: os in ["rhel8", "rhel9"] and hypervisor == 'vmware'
      ansible.builtin.command: dd if=/dev/sr1 of=/mnt/usr/local/install/redhat/rhel.iso bs=4M
      changed_when: result.rc == 0
      register: result
@ -51,21 +43,6 @@

    - name: Setup locales
      block:
-        - name: Configure locale.gen
-          when: os | lower not in ['almalinux', 'fedora', 'rhel8', 'rhel9', 'rocky']
-          ansible.builtin.lineinfile:
-            dest: /mnt/etc/locale.gen
-            regexp: "{{ item.regex }}"
-            line: "{{ item.line }}"
-          loop:
-            - { regex: en_US\.UTF-8 UTF-8, line: en_US.UTF-8 UTF-8 }
-
-        - name: Generate locales
-          when: os | lower not in ['almalinux', 'fedora', 'rhel8', 'rhel9', 'rocky']
-          ansible.builtin.command: arch-chroot /mnt /usr/sbin/locale-gen
-          changed_when: result.rc == 0
-          register: result
-
        - name: Set hostname
          ansible.builtin.copy:
            content: "{{ hostname }}"
@ -103,72 +80,27 @@
            replace: "PermitRootLogin yes"

    - name: Enable Systemd Services
-      ansible.builtin.command: >
-        arch-chroot /mnt systemctl enable NetworkManager
-        {{
-          ' ssh' if os | lower in ['ubuntu', 'ubuntu-lts'] else
-          (' sshd' if os | lower not in ['debian11', 'debian12'] else '')
-        }}
-        {{
-          'logrotate systemd-resolved systemd-timesyncd systemd-networkd'
-          if os | lower == 'archlinux' else ''
-        }}
+      ansible.builtin.command: arch-chroot /mnt systemctl enable NetworkManager sshd
      changed_when: result.rc == 0
      register: result

-    - name: Configure grub
-      when: os | lower not in ['almalinux', 'fedora', 'rhel8', 'rhel9', 'rocky']
-      block:
-        - name: Add commandline information to grub config
-          ansible.builtin.lineinfile:
-            dest: /mnt/etc/default/grub
-            regexp: ^GRUB_CMDLINE_LINUX_DEFAULT=
-            line: GRUB_CMDLINE_LINUX_DEFAULT="loglevel=3"
-
-        - name: Change Grub time
-          ansible.builtin.lineinfile:
-            dest: /mnt/etc/default/grub
-            regexp: ^GRUB_TIMEOUT=
-            line: GRUB_TIMEOUT=1
-
    - name: Configure Bootloader
      block:
        - name: Install Bootloader
-          ansible.builtin.command: arch-chroot /mnt
-            {% if os | lower not in ["archlinux", "debian11", "debian12", "ubuntu", "ubuntu-lts"] %} /usr/sbin/efibootmgr
-            -c -L '{{ os }}' -d "{{ install_drive }}" -p 1
-            -l '\efi\EFI\{% if os | lower in ["rhel8", "rhel9"] %}redhat{% else %}{{ os | lower }}{% endif %}\shimx64.efi'
-            {% else %}/usr/sbin/grub-install --target=x86_64-efi --efi-directory={{ "/boot/efi" if os | lower in ["ubuntu", "ubuntu-lts"] else "/boot" }}
-            --bootloader-id={{ "ubuntu" if os | lower in ["ubuntu", "ubuntu-lts"] else os }}
-            {% endif %}
+          ansible.builtin.command: arch-chroot /mnt /usr/sbin/efibootmgr -c -L '{{ os }}'
+            -d "{{ install_drive }}" -p 1
+            -l '\efi\EFI\redhat\shimx64.efi'
          changed_when: result.rc == 0
          register: result

        - name: Generate grub config
-          ansible.builtin.command: arch-chroot /mnt
-            {% if os | lower not in ["archlinux", "debian11", "debian12", "ubuntu", "ubuntu-lts"] %}
-            /usr/sbin/grub2-mkconfig -o /boot/efi/EFI/{% if os | lower in ["rhel8", "rhel9"] %}redhat{% else %}{{ os | lower }}{% endif %}/grub.cfg
-            {% else %}
-            /usr/sbin/grub-mkconfig -o {{ "/boot/efi/EFI/ubuntu/grub.cfg" if os | lower in ["ubuntu", "ubuntu-lts"] else "/boot/grub/grub.cfg" }}
-            {% endif %}
+          ansible.builtin.command: arch-chroot /mnt /usr/sbin/grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
          changed_when: result.rc == 0
          register: result

-        - name: Ensure lvm2 for non btrfs filesystems
-          when: os | lower == "archlinux" and filesystem != "btrfs"
-          ansible.builtin.lineinfile:
-            path: /mnt/etc/mkinitcpio.conf
-            regexp: '^(HOOKS=.*block)(?!.*lvm2)(.*)'
-            line: '\1 lvm2\2'
-            backrefs: true
-
        - name: Regenerate initramfs
          when: os | lower not in ["debian11", "debian12", "ubuntu", "ubuntu-lts"]
-          ansible.builtin.command: arch-chroot /mnt
-            {% if os | lower == "archlinux" %} /usr/sbin/mkinitcpio -P
-            {% elif os | lower not in ["debian11", "debian12", "ubuntu", "ubuntu-lts", "archlinux"] %} /usr/bin/dracut --regenerate-all --force
-            {% else %} echo "Skipping initramfs regeneration"
-            {% endif %}
+          ansible.builtin.command: arch-chroot /mnt /usr/bin/dracut --regenerate-all --force
          changed_when: result.rc == 0
          register: result

@ -177,8 +109,7 @@
        - name: Append vim configurations to vimrc
          failed_when: false
          ansible.builtin.blockinfile:
-            path: "{{ '/mnt/etc/vim/vimrc' if os | lower in ['debian11', 'debian12', 'ubuntu', 'ubuntu-lts']
-                  else '/mnt/etc/vimrc' }}"
+            path: "/mnt/etc/vimrc"
            block: |
              set encoding=utf-8
              set number
@ -202,7 +133,7 @@
            mode: '0644'

        - name: Create zram config
-          when: os not in ['debian11', 'rhel8']
+          when: os not in ['rhel8']
          ansible.builtin.copy:
            dest: /mnt/etc/systemd/zram-generator.conf
            content: |
@ -214,7 +145,6 @@
            mode: '0644'

        - name: Copy FirstRun Script
-          when: os | lower != "archlinux"
          ansible.builtin.template:
            src: firstrun.sh.j2
            dest: /mnt/root/firstrun.sh
@ -249,20 +179,12 @@
            dest: /mnt/etc/NetworkManager/system-connections/LAN.nmconnection
            mode: "0600"

-        - name: Fix Ubuntu unmanaged devices
-          when: os | lower in ["ubuntu", "ubuntu-lts"]
-          ansible.builtin.file:
-            path: /mnt/etc/NetworkManager/conf.d/10-globally-managed-devices.conf
-            state: touch
-            mode: '0644'
-
    - name: Setup user account
      block:
        - name: Create user account
          ansible.builtin.command: "{{ item }}"
          with_items:
-            - arch-chroot /mnt /usr/sbin/useradd --create-home --user-group --groups
-              {{ "sudo" if os | lower in ["debian11", "debian12", "ubuntu", "ubuntu-lts"] else "wheel" }}
+            - arch-chroot /mnt /usr/sbin/useradd --create-home --user-group --groups wheel
              {{ user_name }} --password {{ user_password | password_hash('sha512') }} --shell /bin/bash
            - arch-chroot /mnt /usr/sbin/usermod --password '{{ root_password | password_hash('sha512') }}' root --shell /bin/bash
          changed_when: result.rc == 0
@ -280,22 +202,12 @@

    - name: Give sudo access to wheel group
      ansible.builtin.copy:
-        content: "{{ '%sudo ALL=(ALL) ALL' if os | lower in ['debian11', 'debian12', 'ubuntu', 'ubuntu-lts'] else '%wheel ALL=(ALL) ALL' }}"
+        content: "%wheel ALL=(ALL) ALL"
        dest: /mnt/etc/sudoers.d/01-wheel
        mode: "0440"
        validate: /usr/sbin/visudo --check --file=%s

    - name: Fix SELinux
-      block:
-        - name: Relabel the filesystem
-          when: os | lower in ['almalinux', 'rhel8', 'rhel9', 'rocky']
-          ansible.builtin.command: "arch-chroot /mnt /sbin/fixfiles onboot"
-          changed_when: result.rc == 0
-          register: result
-
-        - name: Disable SELinux
-          when: os | lower == "fedora"
-          ansible.builtin.lineinfile:
-            path: /mnt/etc/selinux/config
-            regexp: ^SELINUX=
-            line: SELINUX=permissive
+      ansible.builtin.command: "arch-chroot /mnt /sbin/fixfiles onboot"
+      changed_when: result.rc == 0
+      register: result
--- a/roles/environment/tasks/main.yml
+++ b/roles/environment/tasks/main.yml
@ -21,19 +21,16 @@
      when: not archiso_stat.stat.exists

    - name: Setect Interface
-      when: hypervisor == "vmware"
      ansible.builtin.shell: "set -o pipefail && ip l | awk -F': ' '!/lo/{print $2; exit}'"
      changed_when: interface_name.rc == 0
      register: interface_name

    - name: Set IP-Address
-      when: hypervisor == "vmware"
      ansible.builtin.command: "ip addr replace {{ ansible_host }}/{{ vm_nms | default(24) }} dev {{ interface_name.stdout }}"
      changed_when: result.rc == 0
      register: result

    - name: Set Default Gateway
-      when: hypervisor == "vmware"
      ansible.builtin.command: "ip route replace default via {{ vm_gw }}"
      changed_when: result.rc == 0
      register: result
@ -44,7 +41,7 @@
      register: result

    - name: Configure SSH for root login
-      when: hypervisor == "vmware" and vmware_ssh | bool
+      when: vmware_ssh | bool
      block:
        - name: Allow empty passwords temporarily
          ansible.builtin.replace:
@ -85,15 +82,11 @@
      community.general.pacman:
        update_cache: true
        force: true
-        name: "{{ item.name }}"
+        name: "{{ item }}"
        state: latest
      loop:
-        - { name: glibc }
-        - { name: dnf, os: [almalinux, fedora, rhel9, rhel8, rocky] }
-        - { name: debootstrap, os: [debian11, debian12, ubuntu, ubuntu-lts] }
-        - { name: debian-archive-keyring, os: [debian11, debian12] }
-        - { name: ubuntu-keyring, os: [ubuntu, ubuntu-lts] }
-      when: "'os' not in item or os in item.os"
+        - glibc
+        - dnf
      retries: 4
      delay: 15

@ -108,14 +101,13 @@

        - name: Mount RHEL ISO
          ansible.posix.mount:
-            src: "{{ '/dev/sr1' if hypervisor == 'vmware' else '/dev/sr2' }}"
+            src: "/dev/sr1"
            path: /usr/local/install/redhat/dvd
            fstype: iso9660
            opts: "ro,loop"
            state: mounted

    - name: Configure RHEL Repos for installation
-      when: os | lower in ["almalinux", "fedora", "rhel8", "rhel9", "rocky"]
      block:
        - name: Create directories for repository files and RPM GPG keys
          ansible.builtin.file:
--- a/roles/partitioning/tasks/btrfs.yml
+++ b/roles/partitioning/tasks/btrfs.yml
@ -1,56 +0,0 @@
---
- name: Setup BTRFS
-  block:
-    - name: Create btrfs filesystem in main volume
-      community.general.filesystem:
-        dev: "{{ install_drive }}{{ main_partition_suffix }}"
-        fstype: btrfs
-        force: true
-
-    - name: Prepare BTRFS Subvolume
-      ansible.posix.mount:
-        path: /mnt
-        src: "{{ install_drive }}{{ main_partition_suffix }}"
-        fstype: btrfs
-        opts: rw,relatime,compress=zstd:15,ssd,space_cache=v2,discard=async
-        state: mounted
-
-    - name: Enable quotas on Btrfs filesystem
-      ansible.builtin.command: btrfs quota enable /mnt
-      changed_when: result.rc == 0
-      register: result
-
-    - name: Make root subvolumes
-      when: cis | bool or item.subvol not in ['var_log_audit']
-      ansible.builtin.command: btrfs su cr /mnt/{{ '@' if item.subvol == 'root' else '@' + item.subvol }}
-      changed_when: result.rc == 0
-      register: result
-      loop:
-        - { subvol: root }
-        - { subvol: swap }
-        - { subvol: home }
-        - { subvol: var }
-        - { subvol: var_log }
-        - { subvol: var_log_audit }
-
-    - name: Set quotas for subvolumes
-      when: cis | bool or item.subvol not in ['var_log_audit']
-      ansible.builtin.command: btrfs qgroup limit {{ item.quota }} /mnt/{{ '@' if item.subvol == 'root' else '@' + item.subvol }}
-      changed_when: result.rc == 0
-      register: result
-      loop:
-        - { subvol: home, quota: 2G }
-
-    - name: Create a Btrfs swap file
-      ansible.builtin.command: >-
-        btrfs filesystem mkswapfile --size {{ ((vm_memory | float / 1024 >= 16.0) | ternary((vm_memory
-        | float / 2048) | int, [vm_memory | float / 1024, 4.0] | max) | int) }}g --uuid clear /mnt/@swap/swapfile
-      changed_when: result.rc == 0
-      register: result
-
-    - name: Unmount Partition
-      ansible.posix.mount:
-        path: /mnt
-        src: "{{ install_drive }}{{ main_partition_suffix }}"
-        fstype: btrfs
-        state: unmounted
--- a/roles/partitioning/tasks/ext4.yml
+++ b/roles/partitioning/tasks/ext4.yml
@ -11,15 +11,3 @@
    - { lv: var }
    - { lv: var_log }
    - { lv: var_log_audit }
-
- name: Remove Unsupported features for older Systems
-  when: (os | lower in ['almalinux', 'debian11', 'rhel8', 'rhel9', 'rocky']) and (cis | bool or item.lv not in ['home', 'var', 'var_log', 'var_log_audit'])
-  ansible.builtin.command: tune2fs -O "^orphan_file,^metadata_csum_seed" "/dev/sys/{{ item.lv }}"
-  changed_when: result.rc == 0
-  register: result
-  loop:
-    - { lv: root }
-    - { lv: home }
-    - { lv: var }
-    - { lv: var_log }
-    - { lv: var_log_audit }
--- a/roles/partitioning/tasks/main.yml
+++ b/roles/partitioning/tasks/main.yml
@ -28,7 +28,6 @@
        - { number: 2, part_start: 500MiB, name: root }

 - name: Create LVM logical volumes
-  when: filesystem != 'btrfs'
  block:
    - name: Create LVM volume group
      community.general.lvg:
@ -92,7 +91,6 @@
        force: true

    - name: Create swap filesystem
-      when: filesystem != 'btrfs'
      community.general.filesystem:
        fstype: swap
        dev: /dev/sys/swap
@ -111,7 +109,7 @@
      register: main_uuid

    - name: Get UUIDs for LVM filesystems
-      when: filesystem != 'btrfs' and (cis | bool or item not in ['home', 'var', 'var_log', 'var_log_audit'])
+      when: cis | bool or item not in ['home', 'var', 'var_log', 'var_log_audit']
      ansible.builtin.command: blkid -s UUID -o value /dev/sys/{{ item }}
      changed_when: false
      register: uuid_result
@ -124,7 +122,6 @@
        - var_log_audit

    - name: Assign UUIDs to Variables
-      when: filesystem != 'btrfs'
      ansible.builtin.set_fact:
        uuid_root: "{{ uuid_result.results[0].stdout_lines }}"
        uuid_swap: "{{ uuid_result.results[1].stdout_lines }}"
@ -139,7 +136,6 @@
      when:
        - cis | bool or (not cis and (item.path == '/var/log' and filesystem == 'btrfs')
          or (item.path not in ['/home', '/var', '/var/log', '/var/log/audit']))
-        - not (item.path == '/swap' and filesystem != 'btrfs')
      ansible.posix.mount:
        path: /mnt{{ item.path }}
        src: "{{ 'UUID=' + (main_uuid.stdout if filesystem == 'btrfs' else item.uuid) }}"
@ -149,25 +145,20 @@
      loop:
        - path: ""
          uuid: "{{ uuid_root[0] | default(omit) }}"
-          opts: "{{ 'defaults' if filesystem != 'btrfs' else 'rw,relatime,compress=zstd:15,ssd,space_cache=v2,discard=async,subvol=@' }}"
-        - path: /swap
-          opts: "rw,nosuid,nodev,relatime,compress=zstd:15,ssd,space_cache=v2,discard=async,subvol=@swap"
+          opts: "defaults"
        - path: /home
          uuid: "{{ uuid_home[0] | default(omit) }}"
          opts: "{{ 'defaults,nosuid,nodev' if filesystem != 'btrfs'
                else 'rw,nosuid,nodev,relatime,compress=zstd:15,ssd,space_cache=v2,discard=async,subvol=@home' }}"
        - path: /var
          uuid: "{{ uuid_var[0] | default(omit) }}"
-          opts: "{{ 'defaults,nosuid,nodev' if filesystem != 'btrfs'
-                else 'rw,nosuid,nodev,relatime,compress=zstd:15,ssd,space_cache=v2,discard=async,subvol=@var' }}"
+          opts: "defaults,nosuid,nodev"
        - path: /var/log
          uuid: "{{ uuid_var_log[0] | default(omit) }}"
-          opts: "{{ 'defaults,nosuid,nodev,noexec' if filesystem != 'btrfs'
-                else 'rw,nosuid,nodev,noexec,relatime,compress=zstd:15,ssd,space_cache=v2,discard=async,subvol=@var_log' }}"
+          opts: "defaults,nosuid,nodev,noexec"
        - path: /var/log/audit
          uuid: "{{ uuid_var_log_audit[0] | default(omit) }}"
-          opts: "{{ 'defaults,nosuid,nodev,noexec' if filesystem != 'btrfs'
-                else 'rw,nosuid,nodev,noexec,relatime,compress=zstd:15,ssd,space_cache=v2,discard=async,subvol=@var_log_audit' }}"
+          opts: "defaults,nosuid,nodev,noexec"

    - name: Mount tmp and var_tmp filesystems
      ansible.posix.mount:
@ -182,12 +173,12 @@

    - name: Mount boot filesystem
      ansible.posix.mount:
-        path: "{{ '/mnt/boot/efi' if os | lower in ['rhel8', 'ubuntu', 'ubuntu-lts'] else '/mnt/boot' }}"
+        path: "{{ '/mnt/boot/efi' if os | lower in ['rhel8'] else '/mnt/boot' }}"
        src: UUID={{ boot_uuid.stdout }}
        fstype: vfat
        state: mounted

    - name: Activate swap
-      ansible.builtin.command: "{{ 'swapon /mnt/swap/swapfile' if filesystem == 'btrfs' else 'swapon -U ' + uuid_swap[0] }}"
+      ansible.builtin.command: "{{ 'swapon -U ' + uuid_swap[0] }}"
      changed_when: result.rc == 0
      register: result
--- a/roles/virtualization/tasks/libvirt.yml
+++ b/roles/virtualization/tasks/libvirt.yml
@ -1,50 +0,0 @@
---
- name: Check if VM disk exists
-  delegate_to: localhost
-  ansible.builtin.stat:
-    path: "{{ vm_path | default('/var/lib/libvirt/images/') }}{{ hostname }}.qcow2"
-  register: vm_disk_stat
-
- name: Create VM disk
-  when: not vm_disk_stat.stat.exists
-  delegate_to: localhost
-  ansible.builtin.command: qemu-img create -f qcow2 {{ vm_path | default('/var/lib/libvirt/images/') }}{{ hostname }}.qcow2 {{ vm_size }}G
-  changed_when: result.rc == 0
-  register: result
-
- name: Generate Random MAC Address
-  delegate_to: localhost
-  ansible.builtin.shell: set -o pipefail && openssl rand -hex 5 | sed 's/\(..\)/\1:/g; s/.$//' | sed 's/^/02:/'
-  changed_when: false
-  register: mac_address_output
-
- name: Render cloud config templates
-  delegate_to: localhost
-  ansible.builtin.template:
-    src: "{{ item.src }}"
-    dest: /tmp/{{ item.dest_prefix }}-{{ hostname }}.yml
-    mode: '0644'
-  loop:
-    - { src: cloud-user-data.yml.j2, dest_prefix: cloud-user-data }
-    - { src: cloud-network-config.yml.j2, dest_prefix: cloud-network-config }
-
- name: Create cloud-init disk
-  delegate_to: localhost
-  ansible.builtin.command: >
-    cloud-localds {{ vm_path | default('/var/lib/libvirt/images/') }}/{{ hostname }}-cloudinit.iso
-    /tmp/cloud-user-data-{{ hostname }}.yml
-    -N /tmp/cloud-network-config-{{ hostname }}.yml
-  changed_when: result.rc == 0
-  register: result
-
- name: Create VM using libvirt
-  delegate_to: localhost
-  community.libvirt.virt:
-    command: define
-    xml: "{{ lookup('template', 'vm.xml.j2') }}"
-
- name: Start vm
-  delegate_to: localhost
-  community.libvirt.virt:
-    name: "{{ hostname }}"
-    state: running
--- a/roles/virtualization/tasks/proxmox.yml
+++ b/roles/virtualization/tasks/proxmox.yml
@ -1,51 +0,0 @@
---
- name: Deploy VM on Proxmox
-  delegate_to: localhost
-  community.general.proxmox_kvm:
-    api_host: "{{ hypervisor_url }}"
-    api_user: "{{ hypervisor_username }}"
-    api_password: "{{ hypervisor_password }}"
-    ciuser: "{{ user_name }}"
-    cipassword: "{{ user_password }}"
-    ciupgrade: false
-    node: "{{ hypervisor_node }}"
-    vmid: "{{ vm_id }}"
-    name: "{{ hostname }}"
-    cpu: host
-    cores: "{{ vm_cpus }}"
-    memory: "{{ vm_memory }}"
-    balloon: "{{ vm_ballo | default(omit) }}"
-    numa_enabled: true
-    hotplug: network,disk
-    bios: ovmf
-    boot: ac
-    scsihw: virtio-scsi-single
-    scsi:
-      scsi0: "{{ hypervisor_storage }}:{{ vm_size }}"
-    efidisk0:
-      efitype: 4m
-      format: raw
-      pre_enrolled_keys: false
-      storage: "{{ hypervisor_storage }}"
-    ide:
-      ide0: "{{ boot_iso }},media=cdrom"
-      ide1: "{{ rhel_iso | default(omit) }},media=cdrom"
-      ide2: "{{ hypervisor_storage }}:cloudinit"
-    net:
-      net0: virtio,bridge={{ vm_nif }}{% if vlan_name is defined and vlan_name %},tag={{ vlan_name }}{% endif %}
-    ipconfig:
-      ipconfig0: ip={{ vm_ip }},gw={{ vm_gw }}
-    nameservers: "{{ vm_dns }}"
-    onboot: true
-    state: present
-
- name: Start VM on Proxmox
-  delegate_to: localhost
-  community.general.proxmox_kvm:
-    api_host: "{{ hypervisor_url }}"
-    api_user: "{{ hypervisor_username }}"
-    api_password: "{{ hypervisor_password }}"
-    node: "{{ hypervisor_node }}"
-    name: "{{ hostname }}"
-    vmid: "{{ vm_id }}"
-    state: started
--- a/roles/virtualization/tasks/vmware.yml
+++ b/roles/virtualization/tasks/vmware.yml
@ -27,12 +27,6 @@
        state: present
        type: iso
        iso_path: "{{ boot_iso }}"
-      - controller_number: 0
-        unit_number: 1
-        controller_type: sata
-        state: present
-        type: iso
-        iso_path: "{{ rhel_iso | default(omit) }}"
    networks:
      - name: "{{ vm_nif }}"
        type: dhcp
--- a/roles/virtualization/templates/cloud-network-config.yml.j2
+++ b/roles/virtualization/templates/cloud-network-config.yml.j2
@ -1,11 +0,0 @@
-network:
-  version: 2
-  ethernets:
-    id0:
-      match:
-        macaddress: "{{ mac_address_output.stdout }}"
-      addresses:
-        - "{{ vm_ip }}"
-      gateway4: "{{ vm_gw }}"
-      nameservers:
-        addresses: ['1.1.1.1', '1.0.0.1']
--- a/roles/virtualization/templates/cloud-user-data.yml.j2
+++ b/roles/virtualization/templates/cloud-user-data.yml.j2
@ -1,10 +0,0 @@
-#cloud-config
-hostname: "archiso"
-ssh_pwauth: true
-users:
-  - name: "{{ user_name }}"
-    primary_group: "{{ user_name }}"
-    groups: users
-    sudo: ALL=(ALL) NOPASSWD:ALL
-    passwd: "{{ user_password | password_hash('sha512') }}"
-    lock_passwd: False
--- a/roles/virtualization/templates/vm.xml.j2
+++ b/roles/virtualization/templates/vm.xml.j2
@ -1,62 +0,0 @@
-<domain type='kvm'>
-  <name>{{ hostname }}</name>
-  <memory>{{ vm_memory | int * 1024 }}</memory>
-  {% if vm_ballo is defined %}<currentMemory>{{ vm_ballo | int * 1024 }}</currentMemory>{% endif %}
-  <vcpu placement='static'>{{ vm_cpus }}</vcpu>
-  <os>
-    <type arch='x86_64' machine="pc-q35-8.0">hvm</type>
-    <bootmenu enable='no'/>
-    <boot dev='hd'/>
-    <boot dev='cdrom'/>
-    <loader readonly="yes" type="pflash">/usr/share/edk2/x64/OVMF_CODE.secboot.fd</loader>
-    <nvram template="/usr/share/edk2/x64/OVMF_VARS.fd"/>
-  </os>
-  <features>
-    <acpi/>
-    <apic/>
-    <pae/>
-  </features>
-  <cpu mode="host-passthrough" check="none" migratable="on"/>
-  <clock offset="utc"/>
-  <on_poweroff>destroy</on_poweroff>
-  <on_reboot>restart</on_reboot>
-  <on_crash>destroy</on_crash>
-  <devices>
-    <disk type='file' device='disk'>
-      <driver name='qemu' type='qcow2'/>
-      <source file='{{ vm_path | default('/var/lib/libvirt/images/') }}{{ hostname }}.qcow2'/>
-      <target dev='vda' bus='virtio'/>
-    </disk>
-    <disk type="file" device="cdrom">
-      <driver name="qemu" type="raw"/>
-      <source file="{{ boot_iso }}"/>
-      <target dev="sda" bus="sata"/>
-    </disk>
-    <disk type="file" device="cdrom">
-      <driver name="qemu" type="raw"/>
-      <source file="{{ vm_path | default('/var/lib/libvirt/images/') }}{{ hostname }}-cloudinit.iso"/>
-      <target dev="sdb" bus="sata"/>
-    </disk>
-    {% if rhel_iso is defined %}
-    <disk type="file" device="cdrom">
-      <driver name="qemu" type="raw"/>
-      <source file="{{ rhel_iso }}"/>
-      <target dev="sdc" bus="sata"/>
-    </disk>
-    {% endif %}
-    <interface type='network'>
-      <mac address="{{ mac_address_output.stdout }}"/>
-      <source network='default'/>
-      <model type='virtio'/>
-    </interface>
-    <input type="tablet" bus="usb"/>
-    <input type="mouse" bus="ps2"/>
-    <input type="keyboard" bus="ps2"/>
-    <graphics type='spice' autoport="yes">
-      <listen type="address"/>
-    </graphics>
-    <video>
-      <model type="virtio" heads="1" primary="yes"/>
-    </video>
-  </devices>
-</domain>
--- a/templates/almalinux.repo.j2
+++ b/templates/almalinux.repo.j2
@ -1,43 +0,0 @@
-[alma-appstream]
-name=AlmaLinux $releasever - AppStream
-mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/appstream
-# baseurl=https://repo.almalinux.org/almalinux/$releasever/AppStream/$basearch/os/
-enabled=1
-gpgcheck=1
-countme=1
-gpgkey=https://repo.almalinux.org/almalinux/RPM-GPG-KEY-AlmaLinux-$releasever
-metadata_expire=86400
-enabled_metadata=1
-
-[alma-baseos]
-name=AlmaLinux $releasever - BaseOS
-mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/baseos
-# baseurl=https://repo.almalinux.org/almalinux/$releasever/BaseOS/$basearch/os/
-enabled=1
-gpgcheck=1
-countme=1
-gpgkey=https://repo.almalinux.org/almalinux/RPM-GPG-KEY-AlmaLinux-$releasever
-metadata_expire=86400
-enabled_metadata=1
-
-[alma-extras]
-name=AlmaLinux $releasever - Extras
-mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/extras
-# baseurl=https://repo.almalinux.org/almalinux/$releasever/extras/$basearch/os/
-enabled=1
-gpgcheck=1
-countme=1
-gpgkey=https://repo.almalinux.org/almalinux/RPM-GPG-KEY-AlmaLinux-$releasever
-metadata_expire=86400
-enabled_metadata=0
-
-[alma-highavailability]
-name=AlmaLinux $releasever - HighAvailability
-mirrorlist=https://mirrors.almalinux.org/mirrorlist/$releasever/highavailability
-# baseurl=https://repo.almalinux.org/almalinux/$releasever/HighAvailability/$basearch/os/
-enabled=1
-gpgcheck=1
-countme=1
-gpgkey=https://repo.almalinux.org/almalinux/RPM-GPG-KEY-AlmaLinux-$releasever
-metadata_expire=86400
-enabled_metadata=0
--- a/templates/fedora.repo.j2
+++ b/templates/fedora.repo.j2
@ -1,25 +0,0 @@
-[fedora]
-name=Fedora $releasever - $basearch
-#baseurl=http://download.example/pub/fedora/linux/releases/$releasever/Everything/$basearch/os/
-metalink=https://mirrors.fedoraproject.org/metalink?repo=fedora-$releasever&arch=$basearch
-enabled=1
-countme=1
-metadata_expire=86400
-repo_gpgcheck=0
-type=rpm
-gpgcheck=1
-gpgkey=https://getfedora.org/static/fedora.gpg
-skip_if_unavailable=False
-
-[fedora-updates]
-name=Fedora $releasever - $basearch - Updates
-#baseurl=http://download.example/pub/fedora/linux/updates/$releasever/Everything/$basearch/
-metalink=https://mirrors.fedoraproject.org/metalink?repo=updates-released-f$releasever&arch=$basearch
-enabled=1
-countme=1
-repo_gpgcheck=0
-type=rpm
-gpgcheck=1
-metadata_expire=86400
-gpgkey=https://getfedora.org/static/fedora.gpg
-skip_if_unavailable=False
--- a/templates/rocky.repo.j2
+++ b/templates/rocky.repo.j2
@ -1,10 +0,0 @@
-[rocky-baseos]
-name=Rocky Linux $releasever - BaseOS
-mirrorlist=https://mirrors.rockylinux.org/mirrorlist?arch=$basearch&repo=BaseOS-$releasever
-#baseurl=http://dl.rockylinux.org/$contentdir/$releasever/BaseOS/$basearch/os/
-gpgcheck=1
-enabled=1
-countme=1
-gpgkey=https://dl.rockylinux.org/pub/rocky/RPM-GPG-KEY-Rocky-$releasever
-metadata_expire=86400
-enabled_metadata=1
--- a/vars_example.yml
+++ b/vars_example.yml
@ -7,8 +7,7 @@ hypervisor_username: "root@pam"
 hypervisor_password: "SomePassword"
 hypervisor_node:     "NodeName"
 hypervisor_storage:  "local-btrfs"
-boot_iso: "local-btrfs:iso/archlinux-x86_64.iso"
-rhel_iso: "local-btrfs:rhel-9.4-x86_64-dvd.iso"
+boot_iso: "local-btrfs:rhel-9.4-x86_64-dvd.iso"

 # For VMware-Tools
 ansible_vmware_host: "{{ hypervisor_url }}"
Author	SHA1	Message	Date
Sandwich	6df7d5ccfc	Remove non RHEL configuration	2024-11-07 14:57:39 +01:00
Sandwich	75b0e41be6	Remove RHEL ISO variable	2024-11-07 14:26:02 +01:00
Sandwich	38defef1a0	Adjust README for RHEL systems	2024-11-07 14:19:52 +01:00